Glock pic thread

Posted by: LaserJock

Glock pic thread - 04/29/12 09:02 PM

We need one to make this section too legit to quit smile
Posted by: lawn

Re: Glock pic thread - 04/29/12 11:49 PM

Were did you Get that Grip work done to the Bottom or is that a whole Different Frame ? and were can you get them
Posted by: elmer20

Re: Glock pic thread - 04/30/12 10:18 AM

Its a CCF Frame,
http://www.ccfraceframes.com/options.php
Posted by: liebherr804

Re: Glock pic thread - 04/30/12 05:50 PM

Nothing special. just a Glock 22 with TLR-1s
Posted by: LaserJock

Re: Glock pic thread - 04/30/12 10:49 PM

yep, slide and frame is CCF. The only thing Glock left is the fire control group and the sights. Gonna do fiber optics front and serrated rear as soon as funds become avail.

Only feeds with +p+ ammo or my reloads. Fully supported Jarvis barrel. Or can switch out the recoil spring and shoot factory stuff and it is like shooting a 22 with the weight.

Originally Posted By: elmer20
Posted by: daltona117

Re: Glock pic thread - 05/01/12 04:48 PM





Here's mine smile
Posted by: lawn

Re: Glock pic thread - 05/01/12 09:35 PM

hows That Gen 4 dal i was thinking about one But i have a Gen 3 g19 That I like but always like new things
Posted by: daltona117

Re: Glock pic thread - 05/01/12 11:08 PM

Love it. Traded my gen3 for it smile has truglo TFO tritium fiber optic sights and a Ghost 3.5 lb connector. Very sweet shooting.
Posted by: DrinaCorps

Re: Glock pic thread - 05/02/12 07:33 AM

I'll play! Not all the Glocks I've owned, but here are my 30SF, Gen 2.5 30, 19, 26, 34, and 36.






Posted by: DrinaCorps

Re: Glock pic thread - 05/02/12 07:35 AM



Posted by: daltona117

Re: Glock pic thread - 05/02/12 10:30 AM

Work blocks all these cool photos frown
Posted by: jl1966

Re: Glock pic thread - 05/02/12 04:57 PM

My 24C, excellent shooter, breathes a nice little flame with the right ammo!
Posted by: Dan

Re: Glock pic thread - 05/05/12 10:02 PM





Posted by: JAPORMS

Re: Glock pic thread - 05/15/12 02:26 AM

GLOCK 35 USPSA LIMITED DIVISION SET UP



Posted by: daltona117

Re: Glock pic thread - 05/16/12 11:48 PM

Originally Posted By: DrinaCorps
I'll play! Not all the Glocks I've owned, but here are my 30SF, Gen 2.5 30, 19, 26, 34, and 36.





Looks like you could just about drive a semi through that muzzle! Gotta love .45 smile
Posted by: billdncn

Re: Glock pic thread - 05/27/12 12:17 PM








Posted by: TimF

Re: Glock pic thread - 05/27/12 08:36 PM



Glock 17 Gen3, Boresight Solution Frame with Extreme Grip Reduction with 360 degree stippling, Finger Groove Removal, Rounded & Polished Trigger Guard, Textures Frame Flats, Fulcrum Competition Trigger, Heinie straight 8 Ledge sights
Posted by: DRDinthe703

Re: Glock pic thread - 06/01/12 02:28 PM

JAPORMS...that's an awesome Glock! My EDC
Posted by: daltona117

Re: Glock pic thread - 06/02/12 05:04 PM

Just got this today smile

Rocking the longslide.





Posted by: daltona117

Re: Glock pic thread - 06/13/12 09:21 PM





The family just keeps growing smile
Posted by: tacweapon

Re: Glock pic thread - 06/23/12 08:06 AM

Here is a couple pictures of my EDC Glock 19





I stippled the frame myself after cutting down the bottom finger grove, undercutting the trigger gaurd and then trimming down the backstrap and deepening the beavertail
Posted by: pho_krew_sbudz

Re: Glock pic thread - 06/30/12 02:17 PM

My G4 19 and G3 27

Posted by: librarian45

Re: Glock pic thread - 07/07/12 06:25 PM

here's my EDC.
Ugly as sin but 100% reliable and perfectly mated to my hand.
Posted by: cadi86

Re: Glock pic thread - 07/07/12 06:43 PM

LOL
yep that's a keeper!
Posted by: cvpi00

Re: Glock pic thread - 07/08/12 01:28 AM

My gen 3 glock 21sf with a 27 round mag and tac light.
Posted by: K5Blazer

Re: Glock pic thread - 07/19/12 01:06 PM

Here is my G23



I'll snap a pic of my G29. I just realized I dont have any! lol
Posted by: ATFmy3favs

Re: Glock pic thread - 07/21/12 09:03 AM

Laser, I found your new Glock sir.
Posted by: hammer

Re: Glock pic thread - 07/21/12 09:31 AM

looks like a Gun Smoke $1200 paint job
Posted by: LaserJock

Re: Glock pic thread - 07/21/12 10:24 PM

HA! how'd you get into my safe!?!?

why dey always pickin' on me?

Originally Posted By: ATFmy3favs
Laser, I found your new Glock sir.


ATF, can you sticky? I mean this thread
Posted by: bware

Re: Glock pic thread - 07/28/12 11:35 AM

Posted by: halo4

Re: Glock pic thread - 07/29/12 07:36 PM

Bware.. I think you have enough glocks to donate one to the halo4 foundation smile

Good stuff!
Posted by: jaredsmiz757

Re: Glock pic thread - 07/30/12 04:08 PM

Originally Posted By: halo4
Bware.. I think you have enough glocks to donate one to the halo4 foundation smile

Good stuff!


Amen! send one my way too!
Posted by: daltona117

Re: Glock pic thread - 07/30/12 08:43 PM

The new 26







The whole family.

Posted by: cadi86

Re: Glock pic thread - 07/30/12 08:53 PM

AND THE WINNER IS BWARE!!!
Posted by: DrinaCorps

Re: Glock pic thread - 08/04/12 07:25 PM



My (new to me) 3rd Gen 34 thanks to a great trade with a great member today! Can't wait to take her out for a range date!
Posted by: halfded

Re: Glock pic thread - 08/06/12 07:54 PM

Trusty G19 in my 5.11 murse:



And one at night standing guard on the shelf:

Posted by: bustedknee

Re: Glock pic thread - 08/20/12 09:42 PM

26, 19, 17.

Posted by: Just Joe

Re: Glock pic thread - 08/24/12 01:23 PM

Originally Posted By: halfded

PEEKABOO!
Posted by: Chewy D

Re: Glock pic thread - 08/26/12 10:22 AM

I have a Glock now. Am I cool yet? laugh Post 100, yay!

Posted by: halfded

Re: Glock pic thread - 08/26/12 11:11 AM

Is there a can of pepper spray stuck in your magwell? wink
Posted by: Chewy D

Re: Glock pic thread - 08/26/12 11:33 AM

Yup, so when I'm having dinner at a restaurant I can add a little spice and protect myself at the same time laugh

It's a Magpul pinky thing. Came with the gun. I like it, something different looking then the Pearce extensions.
Posted by: halfded

Re: Glock pic thread - 08/26/12 11:54 AM

Ha! "Chuck Norris uses pepper spray to season his steak".

I've seen the magpul things before. Just giving you a hard time is all.

Looks like it makes an effective pinky extension though.
Posted by: DrinaCorps

Re: Glock pic thread - 08/27/12 07:36 PM

I've never seen a Magpul on a Glock. When did they make those?
Posted by: Chewy D

Re: Glock pic thread - 08/28/12 06:08 AM

I dunno when they started making then. They are called "Speedplates." Here's a link to Magpuls site for em:

http://store.magpul.com/product/MAG230/12
Posted by: cttbax

Re: Glock pic thread - 09/25/12 10:20 PM

Gen 4 G17
Gen 3 FDE G17
Gen 3 OD G19
Gen 3 G21SF
Gen 3 G34 with RMR




Posted by: Ttyler3

Re: Glock pic thread - 10/06/12 06:55 PM

Just finished my own grip reduction on my glock 19. I cut it down to the size of a 26. So far it functions just by hand manipulation. I'll be taking it to the range tomorrow for a full battery of tests.


Last photo shows where I cut to far in.
Posted by: ogre45

Re: Glock pic thread - 10/09/12 03:35 PM

New to the site. Here's my 34 gen 3

Posted by: DrinaCorps

Re: Glock pic thread - 10/15/12 08:37 PM

I've seen them so many times, and they all look the same, but something about the G34/35 gets me all excited.
Posted by: doc holiday

Re: Glock pic thread - 10/18/12 08:26 PM

Here is one...
Posted by: daltona117

Re: Glock pic thread - 10/18/12 09:33 PM

Originally Posted By: Ttyler3
Just finished my own grip reduction on my glock 19. I cut it down to the size of a 26. So far it functions just by hand manipulation. I'll be taking it to the range tomorrow for a full battery of tests.


Last photo shows where I cut to far in.



Posted by: ktyhawk

Re: Glock pic thread - 10/20/12 10:29 PM

Originally Posted By: doc holiday
Here is one...



Ummmm.... whiskey tango foxtrot? A chrome Gwagon?
Posted by: doc holiday

Re: Glock pic thread - 10/25/12 08:30 PM

Shoots sweet too...
Posted by: steele11

Re: Glock pic thread - 11/05/12 08:05 PM

30rds of 45acp and 33 rds of 9mm, Glock is my new found addiction. smile





Posted by: 91tegrsjg

Re: Glock pic thread - 11/09/12 03:30 PM

i like the yellow lettering
Posted by: jamiehstanley

Re: Glock pic thread - 11/12/12 10:58 AM

New gen3 32



Holster I made

Wolfe conversion barrel..because I like 9mm and have a 26 and sub2k that uses 9mm mags



fist attempt a grip tape its a lil uneven but I will work it out
Posted by: Wigs08

Re: Glock pic thread - 11/20/12 10:34 AM

My Glock 17 gen 4
Posted by: Frost

Re: Glock pic thread - 11/24/12 10:45 PM

My wife's Glock 17c (and foot)...
Posted by: Frost

Re: Glock pic thread - 11/24/12 10:53 PM

One more of this thing...
Posted by: daltona117

Re: Glock pic thread - 12/11/12 06:31 PM







Just got a new Streamlight TLR1 today, will be living on the Glock 34.
Posted by: LaserJock

Re: Glock pic thread - 12/13/12 10:39 PM

http://www.youtube.com/watch?feature=player_detailpage&v=Y4MdYrwUU0E
Posted by: MultiPurpose

Re: Glock pic thread - 12/23/12 06:36 AM



Posted by: billdncn

Re: Glock pic thread - 12/24/12 07:30 AM

"Small enough to conceal, big enough to fight with." rawk

Posted by: Wigs08

Re: Glock pic thread - 01/20/13 10:08 PM

My Glock 19 gen 4 FDE with crimson trace grip laser
Posted by: Matteo

Re: Glock pic thread - 02/19/13 11:58 AM

G19,OD23, and USA 26.

And the slides swapped on the 23 &19 just cause like the look of the OD with the Nickel Boron.
Posted by: GudOlBoy

Re: Glock pic thread - 03/27/13 04:57 PM

IDPA rig, Gen 4 34, LWD 3.5, Warren Tactical FO sights, Vickers Tactical floor plates, Persec signature series holster, HD Custom mag carrier

My go to, Gen 3 FDE 19/x300 Ultra, LWD 3.5, Ameriglo Idot Pro sights (yellow), Grip Force adapter, Vickers controls, and FDE floor plates (Glock +2 in pic)
Posted by: GudOlBoy

Re: Glock pic thread - 03/27/13 09:35 PM

More gun porn
Gen 2 17 a little grip work, LWD 3.5, Idots (orange), Vickers controls, and floor plates

G26, box stock except dot "." connector. Needs sights bad frown
Posted by: JackMcd

Re: Glock pic thread - 04/04/13 02:46 AM

My Lone Wolf Long Slide
Posted by: UBETRUN

Re: Glock pic thread - 04/04/13 06:36 PM

.
Posted by: JackMcd

Re: Glock pic thread - 04/13/13 01:53 AM

UBETERUN, where did you get that bad a$$ barrel for that G34??? Haha. Nice Glocks!
Posted by: UBETRUN

Re: Glock pic thread - 04/13/13 09:44 AM

Originally Posted By: JackMcd
UBETERUN, where did you get that bad a$$ barrel for that G34??? Haha. Nice Glocks!


My best buddy Jack found it for me on ebay and I love it!

He's a heck of a shot with his 17L, his groups are always just a little smaller than mine no matter how much money I spend...
Posted by: GudOlBoy

Re: Glock pic thread - 04/14/13 08:04 PM

Posted by: daltona117

Re: Glock pic thread - 04/14/13 09:11 PM

nice G34 smile Those lights look right at home on the longslides
Posted by: Busaking

Re: Glock pic thread - 04/21/13 11:55 AM

One of mine
Posted by: GudOlBoy

Re: Glock pic thread - 04/22/13 09:59 PM

Something different
Ranger T series 127 +p+

ZoMbies?! o_O
Posted by: GudOlBoy

Re: Glock pic thread - 04/28/13 01:00 PM

Posted by: CJP

Re: Glock pic thread - 04/29/13 01:03 AM

Atlanta Falcons Glock 27
Posted by: ThinBlueLine

Re: Glock pic thread - 05/17/13 08:04 PM

My precious...(s)


Posted by: wiskytango

Re: Glock pic thread - 05/25/13 10:26 PM

Brand new Gen 4 OD G17. 3 mags, Beavertail back straps 502$ out the door.

Posted by: daltona117

Re: Glock pic thread - 05/25/13 11:54 PM

!!! I WANT ONE !!!
Posted by: GudOlBoy

Re: Glock pic thread - 05/26/13 10:44 AM

Originally Posted By: daltona117
!!! I WANT ONE !!!


Ohh, Ohhh me too must haz! It's good too see some showing up. From what I've seen/read seems to be only Gen 4 17s so far. Where did you score that Wisky?

Edit pic thread.... I be on my suit and tie
Posted by: GudOlBoy

Re: Glock pic thread - 05/28/13 08:48 PM

In the mail today... Raven Phantom LC, very slick rig couldn't be happier. Only 9 days to the door, with the holiday.

Posted by: LaserJock

Re: Glock pic thread - 08/08/13 09:54 PM

"10 Jahre Glock - Dynamit Nobel"

Jahre translates to year

The only hits returned searching for info online was this:

https://www.glocktalk.com/threads/1st-made-10-jahre-glock-dynamit-nobel.1729376/
Posted by: Marksman90

Re: Glock pic thread - 08/08/13 10:24 PM

My Kriss and G21 with TRL-2.
Posted by: bigblock935

Re: Glock pic thread - 08/08/13 10:32 PM

My gen 3 g23 it has lonewolf ss slide 3.5 connector , 6 pound return spring , truglo TFO, ss pins extended slide stop and extend slide release



My gen3 g19 factory ns and 3.5 connector and extended slide release

Posted by: GudOlBoy

Re: Glock pic thread - 08/10/13 10:01 AM

VERY COOL LASER!

Here's the newest member of my G Lock family. OD baby! With all my usual parts, LWD 3.5, Vickers controls, and went with the Trijicon HDs (orange). Probably going to replace the Trijicon rear with a Warren.
Posted by: vxhybrid

Re: Glock pic thread - 08/24/13 09:49 PM

My first milling project, Just needs a good cerakote and it will be up for trade...



Posted by: TimF

Re: Glock pic thread - 12/04/13 07:22 PM



Posted by: TimF

Re: Glock pic thread - 12/08/13 01:41 AM

and for the ladies

Posted by: duffster

Re: Glock pic thread - 12/08/13 09:25 AM

My G23 still under construction, the sights are in the mail.





Posted by: GudOlBoy

Re: Glock pic thread - 12/26/13 10:06 PM

OD & FDE

Posted by: Ratgun

Re: Glock pic thread - 12/26/13 10:41 PM

Might as well have a thread "pics of our overweight wives". Train-wreck. Horrible, but cant...look...away....
Posted by: steele11

Glock G34 & G41 - 02/02/14 01:42 PM

Posted by: GTKamp

Re: Glock pic thread - 02/13/14 07:00 PM

Got a new 19 today....
Posted by: daltona117

Re: Glock pic thread - 03/02/14 12:33 AM

My EDC Glock 19:




Posted by: elmer20

G17 gen 1(1988) - 03/02/14 04:03 PM



Posted by: elmer20

G19 gen2 "000" serial # - 03/02/14 04:07 PM



Posted by: elmer20

Assorted colors - 03/02/14 04:12 PM

Posted by: elmer20

Fishy with OD frame - 03/02/14 04:15 PM

Posted by: elmer20

G19C with FDE frame - 03/02/14 04:42 PM



Another Franken Gun, G19C gen 3 slide and G19 gen 3 FDE frame
Posted by: duffster

Re: G19C with FDE frame - 05/01/14 06:01 PM

My Franken Glock:













[img]http://i1189.photobucket.com/albums/z423/flyguy99901/G2331_zpsfa60b7e2.jpg[/img]

[img]http://i1189.photobucket.com/albums/z423/flyguy99901/G2331_zpsfa60b7e2.jpg[/img]
Posted by: duffster

Re: G19C with FDE frame - 05/01/14 06:02 PM

G20





Posted by: steele11

Re: Glock pic thread - 08/13/14 10:39 AM

Posted by: TPS

Re: Glock pic thread - 10/19/14 10:52 AM

G22 customer owned...
Posted by: LaserJock

Re: Glock pic thread - 11/27/14 07:43 AM

Glock 27

It came to me already stippled. very terrible job. Decided to redo it and change some things along the way:

Finger grooves removed

Trigger guard undercut

Mag release clearance cut

Grip reduction

1911 type beavertail

My un-named stipple pattern
Posted by: Glock17open

Re: Glock pic thread - 01/27/15 08:41 AM

This is my glock, one of many.
Posted by: Koenreich

Re: Glock pic thread - 11/08/15 09:59 PM

G34 MOS with trijicon RMR 06, streamlight TRL-3 and a 33 rounder just for kicks. G43 below.

Posted by: bcpang828

Re: Glock pic thread - 02/07/16 01:10 PM

G34 w/ Trijicon RMR, milled/lightened slide, od cerekote, polished internals, stippled grip w/ reduction, trigger guard undercut, Zev Tech adjustable trigger, Surefure x300, noveske 23rnd mag plate and trijicon supresson sights. Second pic taken before grip and trigger work.
ALSO FOR SALE
www.vaguntrader.com/forums/ubbthreads.php/topics/1002010
Posted by: Hobbez84

Re: Glock pic thread - 04/13/16 04:03 PM

My EDC:





Glock 19 with Vickers Sights and cerakoted burnt bronze by War Rifles @ Manassas. (Super quick turn around, gave it to them Friday, and got it back on a Wed)

It's got a Glock Kraft Gen 2 trigger, which I might ditch for something else. Gonna put another 200-300 rounds before I come to a decision.
Posted by: ninja5_0

Re: Glock pic thread - 05/25/16 06:39 PM

on its way to Agency Arms!!!
Posted by: Halligan

Re: Glock pic thread - 07/13/16 06:55 PM

Picked up a Gen1 17 cerca 1989. While I can't say "new in box" it is darn close. It as if it was bought new yesterday.

Anyway...
Posted by: troutnut

Re: Glock pic thread - 07/25/16 01:10 AM

Nice find Halligan.
Posted by: knothead

Re: Glock pic thread - 01/31/17 08:49 PM

Who cerakotes slides for Glocks in the Richmond area?

Thanks
Posted by: TMVA

Re: Glock pic thread - 03/15/17 08:09 AM

New American Arms
4190 Dominion Bv
Glen Allen 23060

It's in Innsbrook
Posted by: ryanrichmond

Re: Glock pic thread - 03/25/17 10:44 AM

Some of my old ones (Sold a long time ago)














Posted by: ryanrichmond

Re: Glock pic thread - 03/25/17 10:46 AM

Posted by: tspike

Re: Glock pic thread - 07/15/17 07:06 PM

Posted by: ttlphotography

Re: Glock pic thread - 12/19/17 09:54 PM

Battleworn Glock 19 Gen 3 with new Olight PL-Mini



Posted by: ttlphotography

Re: Glock pic thread - 12/19/17 09:57 PM

New to me Glock 20sf with a few personal touches. Stainless steel guide rod, pins, extended slide release and a custom lasered rear slide plate.





Posted by: Fjmtlm

Re: Glock pic thread - 05/21/18 06:41 PM

Not all Glocks but,,,,,,
Posted by: LaserJock

Re: Glock pic thread - 06/10/18 01:43 PM


2 Robar grip reduced non-stippled G21. Company now closed down frown

Posted by: Thegreendutch

Re: Glock pic thread - 09/04/20 09:23 AM

Here’s my Glock 26 I put together. G26.4 with rockslide upper and gen5 G19 barrel. 3.5 trigger and power springs. I love this gun. I do have a Bronnells RMR upper coming for a place to sit my Halosun finally. Thanks for looking

https://i.redd.it/0s2v7oduo2h51.jpg

Posted by: Rumor690 BANNED SCAMMER

Re: Glock pic thread - 04/09/22 11:42 AM

Lovely pictures of Glocks. I would love to purchase one soon
Posted by: shootermcgvn44

Re: Glock pic thread - 08/03/22 11:42 PM

Glock 19 gen 4
Posted by: vic

Re: Glock pic thread - 08/13/22 09:58 PM

Glock 21, KKM barrel and comp, 24 lb NDZ spring and SS gude rod, mags have SLR Rifleworks +4 extension and extra power springs.

Barrel is going to CylinderHone in Henderson NC for throat and leade work.

Shooting .45 Super, 255 grain Hardcast LBT style bullets @ 1050 or so fps with reasonable pressure, ejection is about 7 feet with comp. It's new, so more mods are likely.

Posted by: VivaLaGuns

Glocks for days! - 08/14/22 09:30 AM

All the glocks!