Ar build party

Anyone interested in a build party
http://ak-builder.com/index.php?dispatch=products.view&product_id=30622

I got the tools

I'd love to but got no money for a lower... I could come by and watch/help out with what I can

sooo in

Tentatively interested. Date dependent.

If you got the tools. I am def. in. Let me know the date

Are you getting the lowers or do we need to order are own?

Hey this sounds fun! Where do we get the kit?

Basically here is what we would be doing,

[video:youtube]http://youtu.be/41aPk8k6LBA[/video]

Lanham

Here some sources for ar 15 and ar 10 80% lower receivers

https://www.ar-15lowerreceivers.com/ar/ar-15-lower-receiver/80-lower-receiver/?utm_source=Google&utm_medium=PPC&utm_term=80%25%2BLowers&utm_content=Same&utm_campaign=80%25%2BLowers. 38.75 to 49.95 many different colors

0% billet 28$. Good price for billet http://www.80percentarms.com/collections/lower-receivers/products/0-billet-ar-15-lower-receiver

Polymer 50$. http://www.eparmory.com/Lower-Receivers-s/1819.htm

High quality 120$. http://www.advancedrifles.com/

http://www.hellfirearmory.com/index.php?route=common/home

Billet 160$ to 200$ multiple colors http://www.lockestone.com/shop/ar-15

Ar15 ar10 lower receiver http://aresarmor.com/store/Category/hmgar15

that 0% billet is pretty funny

Yea that was funny, I did a double take

Where/when is this happening? I'd love to make a lower for a pistol build at the end of the summer.

Got a pm from DK, said he will sell dpms lpk for 49.95 with minimum of 5 people.

Loaded two videos talking about milling receivers, annodize and engraving

[video:youtube]http://youtu.be/JD_JR2ttwXI[/video]

[video:youtube]http://youtu.be/YUI7uUhnbEE[/video]

Lanham

Just a quick update, I ordered my 80% lower for 38.95 and free shipping. Did not wait for anyone cause there is no discount for group buy.

Where did you order from? And have u decided on a place and date yet?

I am interested in this as well....sending a PM now.

This is where he ordered the lower from:

https://www.ar-15lowerreceivers.com/ar-15/80-lower-receiver-raw-blast/

If anyone is going to order one we should set up a group buy to save on shipping and possibly get a discount.

I have a little cash and can afford this one.

Got my 80% lower in, will post pics later

I am in!! Let's do this asap. Do you guys have the jig?

80% lower is in

[video:youtube]http://youtu.be/M8MngCqHtg0[/video]

http://www.rainierarms.com/?page=shop/detail&product_id=3971

found this and it kinda looks intriguing (sp?) and seems to be priced decent since it comes with a jig. Only problem is it's a polymer type lower.

someone just posted this:

http://www.vaguntrader.com/forums/ubbthreads.php/ubb/showflat/Number/731800/gonew/1#UNREAD

I asked him what he wanted for them if someone wanted the other one.

I have an AR15 80% lower ready to mill, been waiting on 2x AR308 lowers +jig since 9/2013.

If anyone wants those receivers I'm in Williamsburg till wed, maybe I can meet the guy somewhere

he wants too much for those things, $100 each...

Bootless that seems like panic buy price

yeah, I told him why would I buy it for that when I can get them finished for less

So is this thing still going on my calender?

A date needs to be settled, I more than likely won't have a lower to do.

I think July 19th would be a good date for me, how does that work for everyone else?

Does not have to be one party, could do two or more

does anyone besides Blackhawk have a lower in hand ready to be done?

Any plans for an assembly party? Could we get any vendor to sponsor it?

If you have the parts I'm sure we could assemble it, it's not hard at all.

I was thinking about everyone brining their own parts and getting help from more experienced users on tips to assemble it. Doing it at a vendor site, we could buy missing parts, parts that were mismatched, parts that get lost in the build (gas rolling pin comes to mind ), or upgrades. Maybe the vendor could charge a 'class fee' that could we waived if you bought some of the parts from them at the event.

Hope this isn't dead. Looking forward to finishing a Polymer80 G150 and Ares Armor 80% anodized aluminum lower. I will bring along a brand new Ares Armor AR15 80% jig.

Fullmeasure it's not dead, you don't need a jig I have a mill. I have not posted in a while cause its vacation time. My days in fredericksburg are fri, sat and Sunday till August 8. My only requirement is you bring a friend to help read the digital readout. Pm me and let me know if those days are good for you

Lanham

PM sent.

I met up at Lanham's place this past weekend with a buddy who helped out when I needed a second set of hands and eyes. He helped us learn his tools and was 100% helpful whenever I had questions. I left his place on Saturday with hands and feet bruised, bleeding, and sore from working at the mill all day long, and again on Sunday. Yeah, it was my first time using a mill so it took way longer than it should have and I still managed to make some mistakes along the way, but I couldn't be happier with the finished product:





For anyone that wants to know, the rifle is a 14.7" pinned birdcage carbine gas rifle kit from PSA assembled on a now-100% 80% anodized lower from Ares Armor.

Thanks again Lanham, hope the fish are biting down in VA beach and you're enjoying the hell out of this amazing weather we've been having these past few days.

A couple pictures when Joe and I got together with Robert a couple weeks back.

Lanham, is that your garage? If so, I am severely jealous of all them tools! lol

Don't be jealous, I barely know how to use them. Still figuring it all out.

Are you in Fredericksburg? I am right next to Leeland Train station.

Yes, by Fredericksburg Christian high school, about 10 miles from you. You wouldn't happen to know how to thread on a lathe would you? Lol

Here is the vision armory lower, looks funny, feels funny and machines funny.

got any pics of the inside?

Bootless,

Here you go

has any one else came by to do a lower? and my 308 barrel is still with my rifle at manners so it might be a while before I get it back.

I think we have done 8 lowers so far, i hope to have the mill converted to cnc in the next month or two so it should be much faster to do them.

Just give me a call when you want to do the barrel