Selling: 1 new ProMag 30 round Blue Steel M1 .30 Carbine magazine
Asking $18.00
FTF in Charlottesville area. Willing to ship.

-Also selling. Willing to ship all.

Once-fired brass. Cleaned, De-Primed & Wet Steel Polished:
38 Spcl., .357 Magnum, .300 Win Mag, 44 Mag, .45 ACP (Large primer pocket), 300 Blackout, .270 Winchester, .243 Win,.30 Carbine SOLD, 30-30 Win, .30-06, .223/5.56, Lake City 5.56x45, Hornady .308 Win, Lake City 7.62x51 /.308 Win, 6.5 Grendel, 6.5 Creedmoor

-100 rounds of Lake City M855, greentip, steel rod core, 5.56x45 FMJ. Loose packed.
Asking $40.00

-100 Rnds. Ttl. Tula Tulammo 7.62x39. 50 Rnds. 122 GR. FMJ & 50 Rnds. 124 GR. HP. Both are steel cased, berdan primed and non-corrosive. Loose packed.
Asking $45.00 SOLD

-1-20 Round box of Sellier & Bellot No. 2940 180 GR. Soft Point 7.62x54R
Asking $13.00

-100 Rounds Blazer Brass 115 Gr. FMJ 9mm. Loose packed.
Asking $20.00

-2 Ea. New Tapco Intrafuse 20 round black AK47 magazines
Asking$ 16.00 each

-75 Rounds surplus Yugoslavian M49 7.92x57, 198 Gr. FMJ 8mm Mauser. On stripper clips, in factory sealed boxes. 1953 production.
Asking $25.00

-1 Ea. NcStar Mark III Illuminated Tactical 3-9x42 P4 Sniper Scope. Black reticle & illuminated red & green reticles. Picatinny / Weaver quick release mount. New / Open Box.
Asking $75.00

-VLTOR EMOD (Enhanced Modular) Mil-Spec AR-15 Stock
Like-new. Installed, but never really used.
Asking $80.00
FTF in Charlottesville area. Willing to ship.

The Enhanced Modstock (EMOD) is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. The EMOD was given enough weight to help balance out the normally muzzle heavy feel associated with negative pitch buttstocks. The toe of the buttplate is rolled under; giving the EMOD a superior feel when the weapon is held in the -Inch out of pocket-Inch heads up hold. The buttplate is covered with a removable rubber buttpad that is molded over a metal strike plate. The shape of the buttplate and the rubber buttpad give a solid stock purchase in all situations.
Features:
Mil-Spec dimensions
Heavy duty black polymer construction
Improved ergonomics
Storage compatibility
The Vltor Enhanced Modstock features more storage in the removable, waterproof side compartments; the EMOD holds up to four CR123 or three AA batteries. There is also an additional weatherproof compartment in the clubfoot area of the stock, this compartment can be accessed quickly and holds two AA batteries or other small parts.
Comes pre-assembled with rubber buttpad and strike plate
Matte (anti-reflection/anti-glare) finish
Impact and temperature resistant polymer, specifically blended for VLTOR stocks
Has standard military and quick disconnect swivel socket accessible from both sides

Length with buttpad: 7.75 inches (at centerline of tube)
Weight: 14 oz
LOP fully collapsed: 11.50 inches
LOP fully extended: 15.00 inches
Buttpad angle: -5 degrees with decrease to -15 at toe
Receiver extension is made of 7075 T6 impact extrusion

BUMP

BUMP

BUMP

BUMP