I bought 2 sets one for my SP01 and one for my 75 compact but decided to leave the compact stock so this kit it extra.

Set will fit CZ 75 B and pre B series pistols and most derivative models including 75B compact, P01, Sp01, Sp01 Tactical, Omega, most other model CZ’s.

DOES NOT FIT P10, SHADOW MODELS AND VARIANTS, TAC SPORT OR RAMI.

In original packing from CGW the kit includes:

15 Lb reduced power hammer spring must be used with the reduced power firing pin spring to ensure that you get a hard enough firing pin strike. The spring is colored gold so if you are changing springs for different loads you can tell the weight of this one. Stock spring is about 20 lbs.

Reduced power firing pin spring should be installed with the reduced power hammer spring, can be used with stock firing pins or with CGW extended pin

Reduced Power trigger return spring which is made with higher quality music wire and will last longer than the factory spring. It will reduce your trigger pull by about 1/2 lb.

The factory trigger return spring is the known weak point of these firearms and CZ states these are “standard maintenance parts”. The long leg of the spring will break off and when that happens the trigger won’t work, so the CGW spring is a good replacement or good to have on hand when for when the factory spring breaks.

$16.00 for the set will ship on your dime.

Locust Grove/Culpeper/F’burg area

PM with questions or interest