We need one to make this section too legit to quit

Were did you Get that Grip work done to the Bottom or is that a whole Different Frame ? and were can you get them

Its a CCF Frame,
http://www.ccfraceframes.com/options.php

Nothing special. just a Glock 22 with TLR-1s

yep, slide and frame is CCF. The only thing Glock left is the fire control group and the sights. Gonna do fiber optics front and serrated rear as soon as funds become avail.

Only feeds with +p+ ammo or my reloads. Fully supported Jarvis barrel. Or can switch out the recoil spring and shoot factory stuff and it is like shooting a 22 with the weight.

Here's mine

hows That Gen 4 dal i was thinking about one But i have a Gen 3 g19 That I like but always like new things

Love it. Traded my gen3 for it has truglo TFO tritium fiber optic sights and a Ghost 3.5 lb connector. Very sweet shooting.

I'll play! Not all the Glocks I've owned, but here are my 30SF, Gen 2.5 30, 19, 26, 34, and 36.

Work blocks all these cool photos

My 24C, excellent shooter, breathes a nice little flame with the right ammo!

GLOCK 35 USPSA LIMITED DIVISION SET UP

Looks like you could just about drive a semi through that muzzle! Gotta love .45

JAPORMS...that's an awesome Glock! My EDC

Just got this today

Rocking the longslide.

The family just keeps growing

Here is a couple pictures of my EDC Glock 19





I stippled the frame myself after cutting down the bottom finger grove, undercutting the trigger gaurd and then trimming down the backstrap and deepening the beavertail

My G4 19 and G3 27

here's my EDC.
Ugly as sin but 100% reliable and perfectly mated to my hand.

LOL
yep that's a keeper!

My gen 3 glock 21sf with a 27 round mag and tac light.

Here is my G23



I'll snap a pic of my G29. I just realized I dont have any! lol

Laser, I found your new Glock sir.

looks like a Gun Smoke $1200 paint job

HA! how'd you get into my safe!?!?

why dey always pickin' on me?



ATF, can you sticky? I mean this thread

Bware.. I think you have enough glocks to donate one to the halo4 foundation

Good stuff!

Amen! send one my way too!

The new 26







The whole family.

AND THE WINNER IS BWARE!!!

My (new to me) 3rd Gen 34 thanks to a great trade with a great member today! Can't wait to take her out for a range date!

Trusty G19 in my 5.11 murse:



And one at night standing guard on the shelf:

PEEKABOO!

I have a Glock now. Am I cool yet? Post 100, yay!

Is there a can of pepper spray stuck in your magwell?

Yup, so when I'm having dinner at a restaurant I can add a little spice and protect myself at the same time

It's a Magpul pinky thing. Came with the gun. I like it, something different looking then the Pearce extensions.

Ha! "Chuck Norris uses pepper spray to season his steak".

I've seen the magpul things before. Just giving you a hard time is all.

Looks like it makes an effective pinky extension though.

I've never seen a Magpul on a Glock. When did they make those?

I dunno when they started making then. They are called "Speedplates." Here's a link to Magpuls site for em:

http://store.magpul.com/product/MAG230/12

Gen 4 G17
Gen 3 FDE G17
Gen 3 OD G19
Gen 3 G21SF
Gen 3 G34 with RMR

Just finished my own grip reduction on my glock 19. I cut it down to the size of a 26. So far it functions just by hand manipulation. I'll be taking it to the range tomorrow for a full battery of tests.


Last photo shows where I cut to far in.

New to the site. Here's my 34 gen 3

I've seen them so many times, and they all look the same, but something about the G34/35 gets me all excited.

Here is one...

Ummmm.... whiskey tango foxtrot? A chrome Gwagon?

Shoots sweet too...

30rds of 45acp and 33 rds of 9mm, Glock is my new found addiction.

i like the yellow lettering

New gen3 32



Holster I made

Wolfe conversion barrel..because I like 9mm and have a 26 and sub2k that uses 9mm mags



fist attempt a grip tape its a lil uneven but I will work it out

My Glock 17 gen 4

My wife's Glock 17c (and foot)...

One more of this thing...

Just got a new Streamlight TLR1 today, will be living on the Glock 34.

"Small enough to conceal, big enough to fight with."

My Glock 19 gen 4 FDE with crimson trace grip laser

G19,OD23, and USA 26.

And the slides swapped on the 23 &19 just cause like the look of the OD with the Nickel Boron.

IDPA rig, Gen 4 34, LWD 3.5, Warren Tactical FO sights, Vickers Tactical floor plates, Persec signature series holster, HD Custom mag carrier

My go to, Gen 3 FDE 19/x300 Ultra, LWD 3.5, Ameriglo Idot Pro sights (yellow), Grip Force adapter, Vickers controls, and FDE floor plates (Glock +2 in pic)

More gun porn
Gen 2 17 a little grip work, LWD 3.5, Idots (orange), Vickers controls, and floor plates

G26, box stock except dot "." connector. Needs sights bad

My Lone Wolf Long Slide

.

UBETERUN, where did you get that bad a$$ barrel for that G34??? Haha. Nice Glocks!

My best buddy Jack found it for me on ebay and I love it!

He's a heck of a shot with his 17L, his groups are always just a little smaller than mine no matter how much money I spend...

nice G34 Those lights look right at home on the longslides

One of mine

Something different
Ranger T series 127 +p+

ZoMbies?! o_O

Atlanta Falcons Glock 27

My precious...(s)

Brand new Gen 4 OD G17. 3 mags, Beavertail back straps 502$ out the door.

!!! I WANT ONE !!!

Ohh, Ohhh me too must haz! It's good too see some showing up. From what I've seen/read seems to be only Gen 4 17s so far. Where did you score that Wisky?

Edit pic thread.... I be on my suit and tie

In the mail today... Raven Phantom LC, very slick rig couldn't be happier. Only 9 days to the door, with the holiday.

"10 Jahre Glock - Dynamit Nobel"

Jahre translates to year

The only hits returned searching for info online was this:

https://www.glocktalk.com/threads/1st-made-10-jahre-glock-dynamit-nobel.1729376/

My Kriss and G21 with TRL-2.

My gen 3 g23 it has lonewolf ss slide 3.5 connector , 6 pound return spring , truglo TFO, ss pins extended slide stop and extend slide release



My gen3 g19 factory ns and 3.5 connector and extended slide release

VERY COOL LASER!

Here's the newest member of my G Lock family. OD baby! With all my usual parts, LWD 3.5, Vickers controls, and went with the Trijicon HDs (orange). Probably going to replace the Trijicon rear with a Warren.

My first milling project, Just needs a good cerakote and it will be up for trade...

and for the ladies

My G23 still under construction, the sights are in the mail.

OD & FDE

Might as well have a thread "pics of our overweight wives". Train-wreck. Horrible, but cant...look...away....

Got a new 19 today....

My EDC Glock 19:

Another Franken Gun, G19C gen 3 slide and G19 gen 3 FDE frame

My Franken Glock:













[img]http://i1189.photobucket.com/albums/z423/flyguy99901/G2331_zpsfa60b7e2.jpg[/img]

[img]http://i1189.photobucket.com/albums/z423/flyguy99901/G2331_zpsfa60b7e2.jpg[/img]

G20

G22 customer owned...

Glock 27

It came to me already stippled. very terrible job. Decided to redo it and change some things along the way:

Finger grooves removed

Trigger guard undercut

Mag release clearance cut

Grip reduction

1911 type beavertail

My un-named stipple pattern

This is my glock, one of many.

G34 MOS with trijicon RMR 06, streamlight TRL-3 and a 33 rounder just for kicks. G43 below.

G34 w/ Trijicon RMR, milled/lightened slide, od cerekote, polished internals, stippled grip w/ reduction, trigger guard undercut, Zev Tech adjustable trigger, Surefure x300, noveske 23rnd mag plate and trijicon supresson sights. Second pic taken before grip and trigger work.
ALSO FOR SALE
www.vaguntrader.com/forums/ubbthreads.php/topics/1002010

My EDC:





Glock 19 with Vickers Sights and cerakoted burnt bronze by War Rifles @ Manassas. (Super quick turn around, gave it to them Friday, and got it back on a Wed)

It's got a Glock Kraft Gen 2 trigger, which I might ditch for something else. Gonna put another 200-300 rounds before I come to a decision.

on its way to Agency Arms!!!

Picked up a Gen1 17 cerca 1989. While I can't say "new in box" it is darn close. It as if it was bought new yesterday.

Anyway...

Nice find Halligan.

Who cerakotes slides for Glocks in the Richmond area?

Thanks

New American Arms
4190 Dominion Bv
Glen Allen 23060

It's in Innsbrook

Some of my old ones (Sold a long time ago)

Battleworn Glock 19 Gen 3 with new Olight PL-Mini

New to me Glock 20sf with a few personal touches. Stainless steel guide rod, pins, extended slide release and a custom lasered rear slide plate.

Not all Glocks but,,,,,,

2 Robar grip reduced non-stippled G21. Company now closed down

Here’s my Glock 26 I put together. G26.4 with rockslide upper and gen5 G19 barrel. 3.5 trigger and power springs. I love this gun. I do have a Bronnells RMR upper coming for a place to sit my Halosun finally. Thanks for looking

https://i.redd.it/0s2v7oduo2h51.jpg

Lovely pictures of Glocks. I would love to purchase one soon

Glock 19 gen 4

Glock 21, KKM barrel and comp, 24 lb NDZ spring and SS gude rod, mags have SLR Rifleworks +4 extension and extra power springs.

Barrel is going to CylinderHone in Henderson NC for throat and leade work.

Shooting .45 Super, 255 grain Hardcast LBT style bullets @ 1050 or so fps with reasonable pressure, ejection is about 7 feet with comp. It's new, so more mods are likely.

All the glocks!