Who's Online
14 registered (unreel, Inviktus00, Tesseract, Rudy42, Ders, Benfurr10, roxie, XpertTheft04, dRoth718, ksweaver, JHansen86, PeteH116, 2 invisible), 8 Guests and 8 Spiders online.
Key: Admin, Global Mod, Mod
Topic Options
#1871207 - 03/27/22 09:23 AM Need info on 1 3/4 shot shell
gunslinger123 Offline
Pea shooter

Registered: 03/23/22
Posts: 5
Loc: virginia
City or County: alexandria
I recently bought a Charles Daly pump shotgun. The question is can be one and three quarter inch (1 3/4) or two inch (2) shotshell be used in it? It is a 3 in chamber. I don't see that the smaller shell is an issue as diameter is the same. Only wonder if there are any issues with extraction, ext

Top
#1882533 - 04/28/22 03:57 PM Re: Need info on 1 3/4 shot shell [Re: gunslinger123]
Scolex Offline
Bolt action

Registered: 02/02/14
Posts: 133
Loc: Arlington
City or County: Arlington
I know that Mossberg 500/590s have the Opsol minishell adaptor for more reliable feeding, but not sure about the charles daly:

https://www.midwayusa.com/product/1022010648

Top
#1882562 - 04/28/22 05:47 PM Re: Need info on 1 3/4 shot shell [Re: gunslinger123]
Verylargeboots Offline
Professional FUDD Hater

Registered: 10/10/16
Posts: 655
Loc: VA
City or County: Lynchburg
Extraction will not be a problem, however, feeding from the magazine tube, into the lifter and into the chamber, you will likely run into some issues. I know the Charles Daly is pretty much an 870 clone, is the lifter solid like an 870 or "skeletonized" like a 500/590?
_________________________
Much like anonymous sex, internet based gun transactions are mildly risky, but almost always worth it.

LONG LIVE TRADER-RANDY. A true Patriot and American, Randy helped everyone, loved his family, and was the epitome of a real American. We love you man.

Top
#1887340 - 05/13/22 07:56 AM Re: Need info on 1 3/4 shot shell [Re: gunslinger123]
Ali Offline
Gun fool

Registered: 01/08/12
Posts: 1035
Loc: VA, USA
City or County: Fairfax
The minis are pretty short and besides a break open, the opsol adapter in the Moss is the way to go to keep it reliable.

I have just dropped an occasional one in the chamber on a remington. Eventually trying to cycle an entire tube would have it choke or jam a little.

You could also try Minibuck from Nobel Sport. 6 pellet of 00 buck at 1250 fps, a 2 1/4" shell. May be "long enough" to chamber reliably if you are cycling an entire tube.

I didn't find the grouping to be that impressive but your shoulder will notice the difference.

I've found the mini 1 3/4" shells to recoil similar to a 410 given the 12 gauges 2 lbs add'l mass.
_________________________
"Universal truth is not measured in mass appeal." -- Immortal Technique

"To conquer a nation you must first disarms the citizens" --Adolf Hitler 1933

"Write it down and remember that we never gave in." - Immortal Technique

"Fight fire with water." Me

Top